3-stage-5A EU plug
Excelvan Battery Charger/Maintainer 5A 6V/12V
Trickle Car RV Motorcycle Mower
- Battery type: This battery charger will charge full-drained lead-acid
batteries of both 6V and 12V, capacity of which can be up to 200Ah
for maintenance. High-frequency smart charging technology
keeps batteries at optimal charge.
- Wide applications: Easily connect to lead-acid vehicle battery,
including motorcycle, car, SUV, van, ATV, lawn mowers, and other
maintenance-free, AGM and gel cell battery.
- Three-step charger: It will charge with 3 steps, bulk, absorption
and float, and it will automatically switch at each charging step.
- High efficiency: For 50Ah capacity battery, it will take approx.
10 hours for full charge with its 5A charging current.
- Completely safe: Carry out the all-round protection, PC flame
retardant, as well as reverse polarity and overcharge, overheating,
over circuit, open circuit protection.
- Quiet cooling fan: The fan works while charging to protect it from
heating and make sure that the charger works better.
- LED indicators: 3 LED indicators in total, one for charging, one for
full charged, and the other reminds you of reverse polarity for
- Well-thought design: Ultra-compact and lightweight design
with the mounting holes, non-slipping and easy to store and carry around.
Explanation of three charging steps:
Step 1: Charging with constant current, charged capacity
increase rapidly, battery voltage increase.
Step 2: Charging with constant voltage, charged capacity
keeps increasing, battery voltage increase slowly,
charging current reduce.
Step 3: Battery fully-charged. Charging current reducing and
lower than floating charge switch current, charging voltage
reducing to floating charge voltage.
Floating charge phase: Keep charging with
Floating Charge Voltage.
Product material: PC flame retardant
Certification: GS & CE
Product dimensions: (7.4x1.8x2.9)inch/(18.7x4.5x7.5)cm
Length of plug cable: 60inch/153cm
Length of alligator clip cable: 57inch/144cm
Battery type: 6V/12V lead-acid battery(Normal,Maintenance-free,
CA-CA,AGM and Gel Battery)
Battery Capacity: 10-120Ah, up to 200Ah for maintenance
Charger type: 3-step full automatic charging
Power input: AC 220-240V,0.6A 50Hz
Operation voltage: AC 90-130V, AC 200-260V
Output: DC 7.2V/14.4V, 5A
Insulation class: IP20
Package size:27.2x9.3x13 cm
1 x Excelvan 3-step battery charger
1 x User manual
1. The charger is designed for charging 6V/12V lead-acid batteries.
Do not use the charger for any other purpose.
2. Please connect charger to battery first, and then connect charger
to AC power socket. That is, disconnect AC power source
before connect or disconnect DC.
3. Keep well-ventilated room during charging. Please be away
from naked flame and spark.
4. Connect the red and black connectors to the battery terminals:
red to red and black to black.